Tactical Polarizing Protection Eyeglasses Airsoft Pantiball Goggles Military Fans Goggles Anti-fog O

* Detachable lens design. Locking technology for easier and faster use
* Double nose pad configuration. The nose pad is made of rubber, which has good soft performance and reduces the burden on the nose bridge without pressure
* Anti-shedding headband design. Equipped with an anti-shedding headband, you are not afraid of falling out of your eyes under strenuous exercise

1. Eyeglass frame
2. Grey lenses
3 transparent lenses
4. Yellow lenses
5. Myopia frame
6. Spare nasal rest
7. Glasses rope
8. Glasses bag
9. Glasses casePrecautions for lens replacement:
When changing lenses, place the spectacle cloth between your hand and the lenses to avoid staining the lenses. Rotate the locking knob in the middle of the frame upwards until it is fully open, then pull the lens outwards.

Step 1:
Gently rotate the center frame of the DEDBOLT lens lock to unlock the lens
Step 2:
Remove the lens from the center of the frame and separate the lens from the frame
Step 3:
Gently pull apart the lens and frame, while removing the frame slots on both sides of the lensStep 1:
First, insert one side of the lens into the frame slot, and then insert the other side of the lens into the frame slot as well
Step 2:
Fit the frame and lenses together and rotate the DEDBOLT lens lock of the frame downwards until the fixation is completeStep 1:
When removing the nose rest, be sure to pull the hard plastic part on one side of the lens inside (if only the rubber part is pulled, it may damage the nose rest
Step 2:
Align the lens with the groove in the outer groove and press it into the nose rest with your thumbStep 1:
First, remove the nasal support (removal method is the same as above)
Step 2:
Quickly insert the myopia glasses frame into the slot of the nose rest
Step 3:
Align the nose rest with the lens and press it into the outer groove of the nose rest until they are fixed
Step 4:
Press and hold the nose rest and myopia lens frame and gently push them in the opposite direction until they separate, completing the removal