DC-DC Power Buck Module DC6-32V to QC3.0 Fast Charging Single USB Charging Converter Board

Features:
1.This module is small and compact, suitable for DIY
2.SW3516P fast charging power module adopts high efficiency, full power adopts external MOS tube, double wire parallel wound iron silicon aluminum magnetic ring, with high efficiency and lower heating under charging power,
3.Double parallel low resistance electrolytic capacitors+6 1206 ceramic capacitors. At the same time, special MOS tubes are used to prevent reverse connection of the input for higher performance,
4.Support most mobile phones on the market;
5.A more reliable charging mode;

Parameters:
1.Input voltage: DC6-32V
2.Input method: red (+) black (-) line
3.Product size: 50 * 18 * 12mm
4.Thread length: about 14cm
5.Output port: USB or type-C

Features:
1.Indicator light: blue light indicates output, red light indicates fast charging status!
2.Dual independent current limiting
3.Support multiple protocols:
USB PD3.0/PD2.0 (PPS) support
Qualcomm QC4+/QC4.0/QC3.0/QC2.0 support
Huawei SCP/FCP support
OPPO VOOC partial support
Apple 2.4A support
Samsung AFC support
One plus DASH support
VIVO 9V2A dual engine flash charging support
MediaTek PE2.0/FE1.1 support

Matters needing attention:
1.When USB port and TYPE_ If the mobile phone is plugged into port C at the same time, both ports are 5V output!
2.For fast charging with low voltage and large current, please use the original data cable. If you want to measure the charging voltage and current, you must use a low internal resistance USB meter! Otherwise, the charging current will be affected!
3.OPPO and Yijia mobile phone must use USB port for charging! TYPE is used for agreements such as QC4+/QC4.0/PD3.0_ Port C!
4.When the power supply voltage is higher than 21 V, the C-port PD protocol supports up to 20V3A output, and the module is small. Please use good ventilation and heat dissipation for laptops with PD charging!
5.TYPE_ Port C is used for output charging; Cooperate with C-TO-C/TYPE_ C Male to male dual head data cables charge mobile phones or laptops!

Package include?
Step down module x1

Charging test point:
Multi brand mobile phone charging test USB port:
1.Charging Huawei Mate20 (56% of electricity): open SCP fast charging mode, voltage 4.89V, current 4.59A
2.Charging Huawei P20 Pro (12%): open SCP fast charging mode, voltage 5.03V, current 4.25A
3.Charging glory V20 (43% of electricity): open SCP fast charging mode, voltage 5.13V, current 4.5A
4.Charge millet 8 (18% of electricity): open QC3.0 fast charging mode, voltage 6.44V, current 2.79A
5.Charging OPPO R17 (electricity 43%): open VOOC flash charging mode, voltage 4.8V, current 3.8A
6.Charging iPhone XS (charge 5%): open APPLE2.4A mode, voltage 5.22V, current 2.37A
7.One charge plus 6T (15% of electricity): open DASH flash charge mode, voltage 4.7V, current 3.8A

Type_ Port C:
1.Charging iPhone XR (power: 7%): open PD, voltage: 9.17V, current: 1.91A
2.Charging iPhone X (7% charge): open PD voltage 9.17V, current 1.6A
3.Charging Huawei Mate20Pro (55%): open PD vol