Description:
The double seal ring design can effectively prevent air leakage. And the replaceable feature allows you to replace the suction nozzle.
One-handed operation button design allows you to use it very conveniently. The strong suction makes it very practical and reliable.
Made of fireproof ABS and sponge, it is very durable to use.
The length of this product is 21cm, the width is 2.1cm and the height is 2.1cm.
It is suitable for computers hardware, PCB, electrical components and so on.

Item Name: Tin Sucker
Material: Sponge,Fireproof ABS
Product Suction: 35 (cm-Hg)
Product Specifications: Black
Sealing Gas Ring: Double Ring
Temperature Adjustment Range: 300 Degree Celsius
Features: Strong Suction, Widely Used, Fire-resistant
Size Details:
Size: 21cm x 2.1cm x 2.1cm/8.27″ x 0.83″ x 0.83″ (Approx.)

Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Instructions:
1. First press down the piston of the solder sucker until it is stuck.
2. Use an electric soldering iron to heat the solder joints until the solder melts.
3. While removing the soldering iron, quickly paste the soldering point on the solder suction nozzle and press the solder suction button.
4. The operation is not clean at one time and can be repeated many times.

Tips for using solder sucker:
1. Make sure that the piston of the solder sucker is well sealed. Before powering on, use your fingers to block the small hole of the solder suction head and press the button. If the piston does not easily pop into place, it indicates that the seal is good.
2. The aperture of the solder sucker head has different sizes, so choose the appropriate size to use.
3. When the solder suction head is worn out, replace it with a new one in due course.
4. Before touching the solder joints, dip a little rosin every time to improve the fluidity of the solder.
5. The time for the head to touch the solder joints is a little longer. When the solder melts, draw a circle clockwise with your hands around the solder joint pins, and then press the solder sucker button.

Package Includes:
1 x Tin Sucker